Why isn't your iPhone Charging & How Can You Fix it?

The iPhone usually provides you with optimal performance. But, of course, it doesn’t mean that you don’t face any issues while using it. A range of complex problems may show up on your device. Failure to charge the phone is one of the most common ones among them. Thus, you’d want to resolve this issue as soon as possible before the battery dies.

 

Now, you might not want to run to the service centre straight away. In that case, you can try a few methods to fix the issue. Also, you don’t need any special knowledge or skills for doing that. So, continue reading to find out what you can do to get your iPhone back into charging mode again.

iPhone doesn’t charge: Causes and Fixes for this issue

Looking for the cause behind the problem? It differs in each case, which means there are many of them. So, it might take some time to find where the actual problem lies and how you can proceed to fix it.

 

Want an urgent solution for the issue? To fix the issue on your own, consider the following causes and apply the appropriate solution:

 

1. Dirty charging port

Regardless of the brand, this is one of the most common reasons why phones don’t charge. Do you keep the device in an environment where dust can easily get into its port? In that case, you should consider this as the cause behind the issue. So, take a look at your iPhone’s port and make sure it’s clean.

 

Do you find dust or debris inside it? Then, use a toothbrush to clear it and do this regularly to prevent the issue further. Are you still facing the issue? Then, you need to consider some other causes as well.

 

2. Damaged USB cable

The cable of the charger is another component that you need to examine. After all, it may often get damaged due to various reasons. As a result, you can’t charge your iPhone with it. But, you may not always be able to see any damage on the outside. In that case, connect it to another device and see if it works.

 

Does the cable work with the other device? If yes, then the issue lies in your iPhone. But, if it doesn’t work with the other device either, then the cable is faulty. In that case, you should buy a new one as soon as possible. Also, make sure it’s compatible with your device.

 

3. You're using an incompatible charger

Have you bought a new charger manufactured by any third-party brand? In that case, you need to make sure that it’s compatible with the iPhone. After all, Apple devices are quite restricted when it comes to hardware and software compatibility. So, you need to use a charger that’s made for using them.

 

In case you have to buy a new charger, make sure to find a compatible one this time. Until then, consider using a borrowed one for charging your device. Also, in case you’re wondering, you can find many inexpensive yet good-quality chargers for your iPhone.

 

4. Damaged adapter

The adapter of your charger may often become damaged due to various reasons. As a result, it might cause fluctuations in the power that they supply. In that case, your device will refuse to charge when you use this adapter. So, you would have to buy a new one for your device.

 

Before that, you need to make sure that the adapter is the root cause triggering the issue. For that, simply use a different one with the lightning cable. If you don’t have one available at home, try borrowing it from someone. Does your device charge this time? If yes, that means it's time to get a new adapter that's compatible with your iPhone.

 

5. Try a forced restart

Rebooting your device can solve a wide range of issues in your phone. So, it might work in this case as well, and there’s only one way to be sure. Remove your iPhone from the charger and force restart it. Once you’re done, try charging it again, and see if it works. Also, the procedure might differ based on the model that you’re using.

In 6S, 6S Plus, and older models

Press the Home button and the Power button at the same time and hold them for a few seconds. Then, release them only after the screen shows you the Apple logo.

In iPhones 7 and 7 Plus

Press and hold the Volume down and Sleep buttons together. Let them go once you see the Apple logo on the screen.

For iPhones 8 and 8 Plus

The process is comparably complex for these models. Press the Volume Up button first, and then the Volume Down button. Now, press and hold the Power button until the logo appears on the screen.

 

6. Water damage

This is one of the possible causes behind failure to charge. Moreover, it applies to both your iPhone and its charger. So, you need to check them both for this issue. Have you accidentally dropped your phone in the water? In that case, you must take the SIM card out of the device first. After that, disassemble all parts that allow you to do so, such as the back cover. Then, shake the device to bring out all the water.

 

Once you’re done, try charging your device once again. If it still fails to charge, you must find professional help. In case of any damage to the charger, you have to buy a new one.

 

7. The cover doesn't allow wireless charging

Are you using wireless charging on your iPhone? Most of the recent models come with this convenient feature. But, there are some limitations to it, after all. Sometimes, the phone’s case may get in the way of wireless charging. So, you need to make sure to get a compatible one.

 

There are many phone covers available out there that allow wireless charging. You can get one of them to fix the issue you’re facing. As an alternative, you can also consider using a wired charger.

 

8. Outdated iOS

Have you been using an old system version all the while? The longer you keep delaying an update, the more problems it causes for your device. Outdated software can eventually lead to a wide range of problems on your iPhone. Also, that does include the failure to charge your device, in case you’re wondering. Therefore, you need to update your iPhone as soon as possible.

 

For that, go to the Software Update section given on your device’s General settings page. Opt to proceed with updating your device to the latest version. But, it might not always download the files right away. In such cases, you need to go through another update process.

 

What if these Solutions don’t Work?

Usually, the methods given here should solve the issue you’re facing. But, in some cases, they often fail to provide the requisite solution. In such situations, you can consider restoring your device to factory settings. Apart from that, you should contact a professional, if needed, especially if your iPhone hasn’t crossed its warranty period.

 

Written By Jennifer Hughes